Description

Adnroid APP: EWeLink Support IOS cellphone also, you can search "e-welink" in App to setup it for English version; WIFI control model, no need to program. No matter where you are, you only need to download a APP to connect the wifi and control the cloud. The steps as follows: After connecting the wifi module to the power supply, check the status of the network light, which flashes slowly (once every 2 seconds). Press and hold the reset button for 6 seconds to enter the distribution network mode. At this time, the network light flashes quickly for 2 seconds to stop, and then press and hold the reset button for 6 seconds to enter the compatibility mode of distribution network. When the network light is continuously flashing (twice in 1 second), it is in compatibility mode with the network configuration. At this point, add the device on the APP and locate the wifi module connection. If you have any questions, please us. Feature: Working voltage: USB 5V With signal instruction light and relay pull-on instruction light Power <1W, and quiescent current: 80mA Cutover current<10A , Cutover voltage<250V 10A Relay Model The life of Relay Model is more than 1,000,000 Insulation resistance: 100M Maximum pull-on time: 15mS Maximum release time: 5mS Working Temperature: -40 to 70degree Working Humidity: 40% to 80% RH Function: Default inching Function: Press the open relay by mobile , then cut off the pull-on imediately(default second), it has the timing-share function at the same time. Self-locking when press the inching and locking button with the light on. Press open relay to pull-on, press close relay to cut off. Package included: 1 x Jog Inching Self-locking WiFi Wireless Smart Home Switch 🌟Easy installation and The switch can be applied to access control, turn on PC, garage door, etc. 🌟DIY Your Smart Home,Support Remote turn on/off ,Timing Schedules ,Device Sharing Group ,Management 🌟This wireless switch supports inching /self-locking mode.you can add the device to the APP to remote control most home appliances or devices. 🌟Remote control your home appliances through the App eWeLink by your , available on both Android and iOS 🌟NOTE:WiFi name can only be English or a combination of numbers without spaces, and can only use 2.4G frequency, not 5g frequency